330mA AC/DC led driver constant current

AC/DC led driver constant voltage, ledpower transformer, led driver Features: Adopting full waterproofdesign,IP67 Protective functions:short circuit protection, overload protection, over heating protection. Dissipating by natural air flow. 100% full load aging test. CE and RoHs aprovals XH-A110330-A Output: Rated current: 330mA DC voltage (max): 110V Voltage range: 50-110V Rated power:36.3W Ripple/Noise (max):150mV Voltage tolerance: 3% Set up/Rise time: 80ms/220VAC Hold up time (Typ): 60ms/220VAC Input: Voltage range: 170-250VAC Frequency range: 50-60HZ Power factor (Typ): PF>0.6/220VAC Efficiency (Typ): 83% AC current (Typ): 0.38AC Protection: Short circuit: protection type, recovers automatically after fault condition is removed. Over load: Over load protected at 40% below peak rating. Over temperature: Protection types, shut down o/p voltage, re-power on to recover. Environment: Working TEMP: -30 +50 degrees (refer to output load derating curve) Working humidity: 20-990% RH non-condensing (waterproof) Storage TEMP, humidity: -40 +80 degrees, 10-99%RH Safety & EMC Safety standards: CE mark (LVD), IP67 With stand voltage: I/P-O/P,1.5KVAC I/P-GND: 1.5KVAC EMC test standards: EN55015:2006; EN6 1547:1995+A1:2000:; EN6 1000-3-2:2006; EN6 1000-3-3:1995+A2:2005; EN6 1347-1:2001; EN6 1347-2-13:2006 Note: All parameters not specially mentioned are measured at 220VAC input. Rated load and 25 degrees of ambient temperature.2.Ripple and Noise are measured at 20MHz of band width by using a 12 twisted pair-wire terminated with a 0.1 uf & 10 uf parallel capacitor.Tolerance: Includes set up tolerance, line regulation and load regulation.